Smart thermometer,best baby thermometer,forehead thermometer,ear thermometer:thermometer Shenzhen Urion Technology Co., Ltd. , https://www.urionhealth.com
1. The coating machine is convenient to feed and high in efficiency.
2, easy to clean, the coating pan can be disassembled by itself.
3, the coating machine uses imported spray gun, easy to operate, flexible control of process requirements, good atomization effect, uniform spray of liquid.
4, the machine's unique half-hole design and pot design help to reduce the wear on the core and coating film, improve the yield, thus taking into account the drying efficiency and protection of the coating film.
5, the machine can be equipped with 1~2 different specifications of the pot body according to the need, to solve the confusion of the laboratory variety, the quantity is small, the raw material price is high, etc., the pot body can be more adapted to the diversified customer demand.
Then, knowing the characteristics of this product, you can carry out accurate maintenance, and pay attention to maintenance:
1. The lubricating oil in the gearbox and the grease in the inner cavity of the rolling bearing should be replaced regularly.
2. If the coating pan is not cleaned for a long time, it should be oiled on the surface to prevent the copper of the pot from oxidizing or dampening to produce toxic copper compounds.
3. In order to ensure the lubrication condition of the worm gear in the gearbox, the temperature rise of the box during operation shall not exceed 50 °C.
4. The oil-proof sealing ring at the shaft end of the worm should be checked and replaced regularly (generally no more than six months).
5. The machine must be reliably grounded.
6. Do not dismantle the electrical appliances and belt guards at will.
7. Each time the liquid is added or the powder is removed, the distribution should be uniform; after each liquid is added and evenly distributed, the solution should be fully dried before adding the solution again. The viscosity of the solution should not be too large, otherwise it is not easy to distribute evenly.
8. After the machine is discharged, if it is no longer coated, it should be cleaned in the machinery and pipeline.
9. During the operation of the machine, it is strictly forbidden to block the air vent and the spray gun by hand or other things to avoid damage to the blower and the spray gun.
10, the finished product after coating must be dried at low temperature (zui is air dried), and constantly flipping; avoid exposure and high temperature drying, otherwise it is easy to make the pen oil discoloration.
11. When the spray gun system is not in use, the components should be removed and stored. The spray gun and other components should be stored separately. Before storage, add boiling water to the liquid cup, open the valve, and clean the inside of the spray gun.
In order to accurately maintain the multi-functional coating machine, we must first understand what features this product has. The multi-functional coating machine produced by Taizhou Pharmaceutical Machinery No. 2 Factory has the following characteristics: