Light Amber Halves Walnut Kernels
only divided by color, the quality , the size , the taste are as well as the light halves
different types of the walnut has the different color of the skin of the Walnuts kernels , the little darker color of the light amber color halves is only caused by the different type of the walnuts naturally.
Light Amber Halves Walnut Kernels,Standard Walnut Kernels Light Amber Halves,Walnuts Kernels Light Amber Halves,Light Amber Walnut Kernels Halves Weishan Yuanxing Walnuts Co.,Ltd. , https://www.walnutsxxy.com
The equipment adopts the frequency conversion speed control device, and the speed can be adjusted freely within the specified range. It mainly includes racks, conveyors, loading and filling devices, preheating molding devices, pneumatic devices, PVC unwinding and stepping devices, punching, heat sealing devices, electrical control and other parts. Automatic detection function, if the bag is not opened or the bag is incomplete, no feeding, no heat sealing, the bag can be reused, no material is wasted, and the production cost is saved for the user. Safety device, when the working pressure is not normal or the heating pipe is faulty, an alarm will be given. The bag feeding method can store more bags, and the quality of the bag is lower, and the rate of bagging and bagging is high.
Applicable to: capsules, plain tablets, sugar coatings, capsules, injections, shaped, etc., as well as medical devices, light foods, electronic components blister sealed packaging.
Everyone knows that the wrong use of any device will shorten the life of the device, so if the operation is correct? The following small series to share with you is about the correct operation process of this device, let's take a look at it.
Specific operational procedures:
Well, the above is all about today how to properly operate the multi-function aluminum-plastic packaging machine . Have you learned? I also hope to help everyone.
The main function of the multifunctional aluminum-plastic packaging machine is hard aluminum mechanical forming, special automatic filling, PTP aluminum foil flat pressure heat sealing, batch number, indentation tear line, and medicine board blanking. Applicable to aluminum, aluminum or aluminum plastic packaging for tablets, capsules and other shaped tablets.
1. First, the green indicator light is turned on, and the heating switch of the upper and lower and the heat seal are respectively turned to the "ON" position. The workbench*, the temperature controller controls the forming temperature, and the preset temperature is preset to 90C? and 100C?, the second temperature. The controller is heat-sealed, and the temperature presets 120C?-140C? up and down, forming and heat-sealing the temperature controller to preset the temperature, as appropriate.
2, then put down the pressing block on the feeding roller, the temperature of the forming heating plate is in place, and then open the main machine, the plastic PVC is first formed, the forming blister is in conformity with the hole position of the heat sealing mold, and the heat sealing mold seat is pressed down by the heat sealing mold. Aluminum foil, aluminum foil will drive to the punching. Observe whether the plastic (referred to as the machine surface has been formed PVC) travels left and right offset. If there is a bias, the pressure roller should be adjusted to adjust the starting direction.
3. If the aluminum foil of the aluminum-plastic packaging machine is tilted left and right, the adjustable roller seat can be adjusted. If the front and rear deviations are adjustable, the box moves.
4. After the heat seal is punched out, the feeder gate is opened moderately, so that the medicine (tablet capsule, sugar coating) enters the feeding room in an appropriate amount. If there is a small amount of missing grain, it can be manually filled. The first thing to pay attention to when filling the grain: roller pressure roller Rolling hands and hooks break the aluminum foil. In addition, the formed blister is passed to the side of the pressure roller. There is a lack of grain. Do not reluctantly replenish it. Fill the hole. If the drug is brought in, it will affect the synchronization more seriously. When the aluminum foil is sealed, it is light. On the sticky mold, it is necessary to collect the machine.
5, due to increased drug weight, aluminum foil tension and machine temperature gradually change procedures, may cause molding and heat sealing is not synchronized, leading or lagging, first check whether plastic PVC and aluminum foil have a negative separation, and then can be adjusted by fine adjustment mechanism on the machine. The fine adjustment mechanism adjusts the distance or the front and rear adjustment of the cabinet as the mold moves forward and backward. Therefore, it should be placed in the neutral position before starting, so that it can be moved forwards and backwards. It can also be adjusted by moving the front box. After correct movement, the section has to wait for more than ten editions to be correct, so when it is not finished, do not Adjusted to adjust.
6. The heat-sealing quality of the plastic aluminum foil of the aluminum-plastic packaging machine (the uniformity and firmness of the bonding) is evidenced by the temperature or pressure, and the flatness of the anilox plate. If the heat sealing is bad, the temperature is generally suitable, and the temperature is generally moderate. Low, adjust the temperature, zui adjust the pressure of the screw.
7. Punching the offset, cutting the layout offset, stopping the manual movement of the box, the mold shift can be adjusted.
8. Finally, in the daily operation knowledge, for the operation of aluminum-plastic packaging machine, you must know the structure principle of the machine. The roller of the cam drive ejector seat, the up and down stroke, the position of the upper cover template is fixed, and the blister is in a bad state. Forming die or heat sealing to the top dead center, fasten the column nut, if it is not careful, it is easy to malfunction, the roller needle of the ejector pin is bitten to death, and the elimination method.