1, inverted rattan:

Watermelon inverted vine period: When the melon vine grows to 5~6 true leaves.

Method of pouring vines: Put a piece of mud or soil on the base of the vine that is opposite to the direction of the main vine; force the vine to climb to the ground in the direction of extension.

2, Li Teng:

The vine period: After the vine. In the long period of melon, the vines are once every 2~3 days.

Method of vines: straighten the vines, make the vines evenly distributed on the surface of the vines, and put the vines that extend out of the stalks back into the sputum and fix them.

3, pressure vine:

The role of pressing vines: positioning the melon vines to promote the growth of adventitious roots and expanding the nutrient absorption area of ​​the plants.

During the pressing period: when the vine grows to 40~50 cm, it starts to press the vine.

Method of pressing the vine: press the vine with the soil, and then press it every 4~5 knots, and press 3~5 times. However, it should be noted that the front and rear sections of the melon can not be pressed, and the arid areas and the heavier sandy soil should be dark pressed (that is, a section of vines buried in the soil), and the rainy areas and the more viscous melon should be used. Pressure (pressed on the melon vine with mud); the watermelon land is usually not pressed. The vine should be carried out on a sunny afternoon. On a rainy day and a sunny morning, the water content of the vine is large. It is generally not suitable to press the vine to prevent the vine from being too brittle and broken.

4, cut the rattan:

The role of watermelon vines: adjust the coordination of vegetative growth and reproductive growth of watermelon plants.

The period of cutting the vine: generally from late June to early July.

Method of cutting vines: There are two ways to use the vines. One is the single-vine type, that is, all the vines are cut off, leaving only the main vine. The second is the double-vine or the three-vine type, that is, one or two thick vines on the third and fifth quarters of the main vine and the main vine, and the remaining vines are all cut off. Which method of cutting the vine is adopted should be based on factors such as variety characteristics, planting density, soil fertility, and fertilization level. For the varieties with high planting density, high soil fertility, large amount of fertilization and strong branching ability, single-vine-type vines should be used, otherwise, double-vine or three-vine vines can be used. Early-maturing watermelons generally only leave one vine.

5, stay melon:

Period of staying in the melon: Generally, the second or third female flower on the main vine is left.

Method of staying in melon: large-scale melon seeds, cultivated densely, and strive for early-maturing and high-yield watermelons, leaving only one melon per plant; small melon varieties, each plant can leave 2~3 melons, but it is not suitable to stay at the same time. Excessive melons affect precocious puberty, and the two watermelons are not large. When two female flowers are opened on one vine at the same time, one should be removed, and the female flower squash with large shape and thick flower stalk can be selected, and the two flowers can be removed into small melons. Melon, keep its strong melon.

Disclaimer: Some articles on this website are transferred from the Internet. If legal rights of third parties are involved, please inform this website. phone

Anchoring & Grounding

Anchor Rods & Grounding Rods

Thimble Eye, Twin Eye, Triple Eye and Oval Eye Anchor Rods are used for guying with expanding and cross plate anchros. Hot dip galvanized to meet ASTM A153 specification.

No Wrench Anchor are used for guying wires at utility poles. Eye dimensions are the same as Anchor Rods.

Expanding Anchor are made for installation in hole augered by power drillers. A retainer on the bottom holds the nut from the forged eye rod. Black Painting or Hot dip galvanized finish.

Ground Rods are used as a grounding electrode for building and poles. These rods have a cone point for easy driving and a plain end for attaching a ground rod clamp. Hot Dip Galvanized or Copper plating finish.

Extension Anchor Rod used in conjunction with internally tapped anchors and couplings or eye nuts.

ROD PACKAGING

Anchoring Grounding,Galvanized Ground Rod,Copper Bonded Earth Rod,Rock Anchor Extension Rod

Ningbo Yokelink Machinery Co.,Limited , https://www.yokelink.com