The ZH-PT animal experiment running platform (flat treadmill) is mainly used for running sports training for white and small animals, which can replace traditional swimming training and make the training intensity index more accurate. It is one of the necessary means for experiments such as physical fitness, endurance, sports injuries, nutrition, medicine, physiology and pathology. Second, technical indicators 1, the number of runways: 8 channels 9, the running platform inclination angle ± 35 ° are adjustable 2. Rat track single track specification: 1000× 96× 120 mm 10, running time: 00:00:00 ~ 99:99:59 3, rat runway overall specifications: 1000 × 810 × 130 mm 11, rest time: 00:00:00 ~ 99:99:59 4, mouse track single track specifications: 1000 × 50 × 120mm (optional). 12, stimulation current: 0.05 ~ 4mA 5. The runway speed is steplessly adjustable, ranging from 1-40 m/min. 13, USB interface and computer connection, data acquisition software, data storage in real time. 6, the maximum operating distance of the meter: 00000.00m, the maximum speed of 1-40 meters / min. 14, the use of voltage 220V single phase, frequency 50HZ, total power 200W. 7, computer operation and display 15. Stimulus: sound, light, electricity 8, button: button type 16, collecting data: time, distance, number of electric shocks Corn is a good choice for consumption during weight loss because of its high available energy. The metabolic energy of maize is 14.06 MJ/kg, with the highest being 15.06 MJ/kg, the highest of the cereal feeds. This is mainly due to the fact that there is very little crude fibre in maize, only 2%, while the nitrogen-free leachate is up to 72% and the digestibility is up to 90%; on the one hand, maize has a high crude fat content, between 3.5% and 4.5%. Corn Cut,Sweet Corn Cut,Fresh Corn Cut,Vacuum Packet Corn Jilin Province Argricultural Sister-in-law Food Co., Ltd. , https://www.nongsaocorn.com
Experimental steps:
1) Open the software and click the “Start Settings†button (the Start Settings button will turn green) and the last set parameters will be imported.
1 Total time: Set the total time of the experiment. It can be input directly through the keyboard through the middle input box, or it can be adjusted by the leftmost button. The step value is 1 minute.
2 Running time: Set the time for the animal to run. The setting method is the same as the total time setting.
3 rest time: set the time for the animal to rest, the setting method is the same as the total time setting.
4 Stimulus setting: Set the current level of the electrical stimulation, set by the left button, the step value is 0.05mA.
5 Select COM port: Select the communication port of the serial cable and the computer. The default is COM1.
6 speed setting: adjust the speed, the step value is 1m/min. Support real-time adjustment.
7 Sound stimulation: Control the presence or absence of sound stimulation, and control in real time after the experiment begins.
8 Light stimulation: Control the presence or absence of light stimulation, and control in real time after the experiment begins.
9 electrical stimulation: control the presence or absence of electrical stimulation, real-time control after the start of the experiment.
2) After the parameter setting is completed, click the “Start Experiment†button. At this point the motor starts and the data is displayed in the blue area on the right and is displayed in the lower right corner in tabular form.
3) The experiment end button can stop the experiment at any time, and the experiment will stop when the test time is up.