The granule packaging machine can be divided into large packaging and small packaging. The small packaging is suitable for filling granular materials with good fluidity such as plastic granules, fertilizer granules, feed granules, chemical granules, chicken essence, monosodium glutamate, white sugar, seeds, coffee beans, Quantitative packaging of materials such as whole grains.
Advantage:
The packaging weight of the granule packing machine is generally in the range of 20 grams to 2 kilograms, which is used to package various granular materials, and the machine has high working efficiency and low energy consumption. More than three hundred watts can be put into operation and production normally, but the precision of the machine is very high, and the space occupied is generally four thousand millimeters by one thousand millimeters, occupying a small area, high utilization rate of the site, and low energy consumption.
The rolling property of the particles is large. When the belt is conveyed, attention should be paid to the stability of the particles and the transmission loss. The space occupied by the belt conveyor is also small. The width of the belt is only three thousand millimeters, and the space is only 400 millimeters, which is greatly increased. The flexibility of the belt, the transmission efficiency can be better guaranteed, and because of its low weight, the required energy consumption is smaller, and the low energy consumption and high efficiency are the characteristics of the granule packaging machine.
The basic situation of the granule packing machine is the same, we can use it to do a lot of practical work. Reduce the cost of work, polypropylene and polyethylene are good packaging materials.
1. The tank part of the machine is equipped with oil meter. It should be refueled once before starting. It can be added according to the temperature rise and operation of each bearing.
2. The worm gear box must store oil for a long time. The height of the oil surface is all invaded into the oil. If it is used frequently, it should be replaced with new oil every three months. There is oil plug at the bottom of the sputum.
3. When the machine is refueling, do not let the oil spill out of the cup, and do not flow to the surroundings of the machine and the ground. Because oil is easy to contaminate materials, affecting product quality.
1. Check the machine regularly and check it once a month to check whether the worm gear, the worm, the bolts on the lubrication block, the bearing and other moving parts are flexible and wearable. The defects should be repaired in time and should not be used barely.
2. The machine should be used in a dry and clean room. It should not be used in places where the atmosphere contains acids and other gases that are corrosive to the body.
3. After the machine is used or stopped, the rotating drum should be taken out to clean and brush the remaining powder in the bucket, and then installed, ready for the next use.
4. If the deactivation time is long, the machine must be cleaned and cleaned. The smooth surface of the machine is coated with anti-rust oil and covered with a cloth.
Precautions
1. Before each boot, check whether there is any abnormality around the machine.
2. When the machine is in operation, it is strictly forbidden to get close to or touch the moving parts of the body, hands and head!
3. When the machine is in operation, it is strictly forbidden to put the hand and the tool into the sealing knife seat!
4. When the machine is in normal working, it is forbidden to frequently switch the operation buttons. It is strictly forbidden to change the parameter setting values ​​frequently;
5. It is forbidden to operate at super high speed for a long time
6. It is forbidden to operate various types of switch buttons and mechanisms of two or more colleagues; the power should be turned off during maintenance and maintenance; when multiple people are debugging and repairing machines at the same time, they should pay attention to communicate with each other and prevent accidents caused by non-coordination. Guangzhou Xuguang Packaging Machinery Equipment Co., Ltd. is a modern enterprise integrating R&D, production and sales. With superior advantages and solid manufacturing skills, we have developed a series of vertical packaging machinery, pillow packaging machinery, and bubble packaging machinery. This series of machinery is widely used in the automatic packaging of granules, powders, liquids, puffed, tea bags and other products. Various models and spare parts are also very complete. In the fierce market competition, the factory adheres to the tenet of “customer first, quality*”, and constantly innovates the technical, pragmatic and honest working principles, and has won unanimous praise from customers. Customers are welcome to call us, we can customize the machinery according to the requirements!

Fingerprint Safe

Fingerprint Safe ,Fingerprint Safe Box,Safe Box Fingerprint,Safe Box With Code

Ningbo Zhaomu Electronic Commerce Co., Ltd. , https://www.bofonhome.com