When we are using a Medical sterilizer, we need to pay attention to some matters.All these matters must be taken care of after installing or emptying the water in the water heater for the first time. Before the water heater can be filled with water,Medical sterilizer can be turned on;The filter cotton under the sterilizer cartridge must be replaced before the storage temperature reaches above 61°C;the lid must not be opened during the sterilization process.When the cover fails to close, press the cover button again to close the lid again;the sterilizer should check whether it forms a block before use,and shake the medicine box to separate the powder into a powder;use the endoscope without a waterproof device The equipment is sterilized;all endoscope lumens must be cleaned,the detachable parts must be disassembled and sterilized,Medical sterilizer with the switch to the[open"position;the instruments in the sterilization tray are discharged naturally and neatly,connecting the hose and The instrument hose must not be folded or twisted;when sterilized,the hose should be placed in a circular arc and not twisted.
When using a Medical sterilizer to disinfect the device,Medical sterilizer device must not be over the surface of the plate.If the[sterile failed"mark is printed after the sterilization is completed,the Medical sterilizer manufacturer shall be notified of the treatment.The sterilized device shall be stored in a sterile environment,Try to shorten the interval between sterilization and use of the device and avoid secondary pollution of the device.If there is water seepage in the lid,immediately notify the person concerned to replace the seal on the lid.Make a simple cleaning before and after the start of the daily operation.Dry the water in the sterilization tray with a dry cloth,then wipe the inside and outside surfaces of the lid with 70% alcohol and cover the lid.Medical sterilizer when it is not used for a long time,it runs automatically every 7 days.Do a thorough cleaning once a month and replace the filter element.Put the water of the water heater,re-fill the tank,and run it with a Medical sterilizer before using it.