Millimeter Wave Therapy Machine What is Millimeter wave therapy?
Millimeter wave electro-magnetic therapy is supplemented by way of energy through the meridians, body fluid pathways, neural pathways, to regulate patient immune system.
Millimeter wave application:
Millimeter wave Therapy Machine Main functions
Millimeter Wave Therapy,Millimeter Wave Therapy Machine,Wave Therapy Machine,Millimeter Therapy Machine Shenzhen Guangyang Zhongkang Technology Co., Ltd. , https://www.szlighttherapymachine.com
Millimeter wave is 1-10mm electromagnetic wave, it is equal to frequency range 300GHZ-30GHZ, it is a low power, short wavelength, high frequency electromagnetic wave and locates in interchange of the light wave, also called extremely high frequency electromagnetic wave.
Millimeter wave is a kind of green therapy that is safe effective and non-toxic side effects, its unique [Electromagnetic resonance theory of coherent oscillation"and Non-thermal remote effect", have obvious effect on the biological macromolecules, cell and visceral organ, can promote the growth of hematopoietic cell, improve the body` s immune system function, promote tissue repair regeneration, promote inflammation absorption and ulcer healing, coordinate the body`s physiological function by the resonance effect of oscillation frequency, thus get a significant biological effects.
1. Non-thermal effects
Millimeter does not treat diseases via increasing body temperature. In the treatment of diseases, no thermal, no pain, no simulation, an internationally recognized green therapy.
2. Distal effects
Millimeter wave can be conducted through the inter-cell, neural, humeral, an other means of the meridian through the irradiation point on the biological activity, or even the effect of the body up to the depth of the lesion.
3. The cumulative effect of time
Millimeter-wave of cell repair and adjusting will take some time, with the increase in the number of treatments:the more intense the millimeter-wave effect on the biological effects of the body, the treatment effect is more obvious.
Millimeter-wave therapy can be applied to many special occasions, either as a single therapy, or combined with a variety of other medical methods for safe usage.
The dicing machine is mainly composed of a frame, a casing for cutting materials, a pusher dial, a tool assembly, a transmission system and an electrical control system. In view of the characteristics of the fruit sticks, combined with the method of hand-cut fruit, it is used for fruits with high sugar content and sticky knives, such as apple 脯, apricot, strawberry 脯, pear 脯 and so on.
Candied dicing machine operating procedures:
Pre-operation check
1. Before use, check whether the equipment is in good condition and whether the cutting blade is sharp, especially if the electrical circuit is safe.
2. Clean the vegetable conveyor belt conveyor and the slicer with warm water of 60 degrees or more.
3. Turn on the power switch to see if the idling is normal.
Steps
1. The material to be cut should be washed and mixed. If the material to be cut is mixed with sand and mud, the cutting edge and the blade are easily damaged and blunt. The material cut size should not exceed 100mm. If it is larger than this diameter, it must be divided into blocks.
2. Press the start button motor to run. (The above cover is not pressed on the frame, the switch XK cannot be pressed, the line is blocked, the motor cannot run)
3. The material to be cut is uniformly and continuously fed into the feeding hopper from the hopper. Under the action of the pushing material dial, it is cut into the required thickness by the cutting knife, and then cut into strips by the disc cutting knife, and finally is horizontally Cut the knife into squares.
4, the adjustment of the dicing machine specifications: by adjusting the thickness of the slice, replace the disc cutter and cross cutter to change.
5. When the machine is working, do not put your hands and other foreign objects into the casing to avoid danger.
Cleaning work after the operation of the dicing machine
1. Clean the conveyor belt, the cutting blade and the slicer with warm water above 60 °C, and clean the inside and the water tray.
2, the cutting machine should be placed in a cool, ventilated, dry place.