Points to note when designing stainless steel tapered roller bearings

Generally speaking, stainless steel tapered roller bearing manufacturers must carry out different types of bearing design work before making bearings. Here, let's talk about some points that should be paid attention to in the design work.

1. When designing the stainless steel tapered roller bearing manufacturer, the first thing to pay attention to is to clearly mark the grades of the outer ring, inner ring, cone and other manufacturing materials on the bearing products and the standards used in the execution.

2, the technical requirements on the design drawings should be clearly written in the end which is in line with that standard, it should not be used to meet the relevant standards, it seems very vague, very general requirements.

3. The parameter description of the bearing structure on the design drawing and the standards to be implemented must use the general parameters in the current standard.

4. A product should be able to form a series of designs. The materials used for the ferrules, rolling elements, etc. should be as consistent as possible, and should be able to be reused as much as possible to help manufacturers reduce the material cost of production. Generally, the size of the ferrule should be given a corresponding size table to facilitate the common performance of the same series.

5. The surface and transition surface of all designed and manufactured products should be executed according to the principle of smooth transition. The surface is absolutely not allowed to have burrs, scratches, sharp angles, etc. This principle is also more convenient for prevention. rust.

For stainless steel tapered roller bearing manufacturers, this kind of bearing is actually a relatively new product, but in fact, its design is not too different from ordinary bearings, but it needs to follow stricter specifications in manufacturing. As long as you pay attention to the above points during design, you can ensure smooth production.