Grafting cucumber seedlings, plant growth can be strong, to enhance the plant's ability to resist low temperature, resistance to soil-borne diseases, increase production, to achieve the purpose of increasing output value. The main techniques for grafting cucumber seedlings are as follows: First, preparation before sowing: Select disease resistance, high yield, high quality suitable for market needs. Before seeding, the seeds shall be sunburned for 48-72 hours to sterilize the seedbeds, and tools such as blades, grafting clips, bamboo sticks, and nutrients and nutritious soil shall be prepared. Second, soaking seed germination and sowing: The seeds of pumpkin seeds (preferably with the seeds of the previous year, the new seeds have a dormancy period of 120 days): 667 square meters with the amount of 2 to 2.5 kg. Slowly pour the seeds into hot water of about 70°C and continue stirring until the water temperature is 30°C. Then rinse thoroughly and then soak in warm water of 25°C for about 12 hours, and then germinate under the conditions of 28-32°C for about 36 hours. The seed can be sown when the shoot length is 2 to 3 mm. Cucumber seeds: 667 square meters with a seed amount of 50 grams. Slowly pour the seeds into the hot water of about 60°C, and continuously stir until the water temperature is 30°C. After soaking for 6-7 hours, rinse with water 2 or 3 times and control the water. The soaked seeds are wrapped in clean and moist cotton brie germination, germination temperature 25 ~ 30 °C, after 24 to 36 hours to Qiqi, shoots when 2 to 3 mm when you can sow. The seeding period depends on the seedling age and the duration of planting. Cucumber seed is sown 5 to 7 days earlier than the seed of pumpkin seeds. Greenhouse cucumber breeding time from late September to early October, cucumber greenhouse nursery time in mid-late January. The sowing temperature from sowing to seedling should be appropriately higher, about 28°C during the day and about 25°C at night. After emergence, water should be controlled to prevent leggy. The principle is to see the drought and then water, the seedling period to try to fight for light, light and temperature on the cucumber yield and quality have a very close relationship. The cucumber sowing density is: 3 ~ 4 cm is appropriate, pumpkin is 1.5 ~ 2 cm is appropriate. When sowing, soil was disinfected with 70% mancozeb zinc wettable powder 2g and 25% metalaxyl wettable powder 18kg on the bed soil. Cover soil thickness: cucumber 1 cm, pumpkin 1.5 cm, after the broadcast covers the surface of the film and covered with a small shed, insulation, moisturizing, when the emergence of more than 50% withdrawal cover. Third, the grafting method: about 15 days after cucumber sowing, cucumber seedlings from yellow to green, fully expanded, the second true leaves slightly exposed; pumpkin seed leaves, the first piece of real leaves for the first time grafting the best time . First, use bamboo sticks to dig out the growing point of the pumpkin seedlings, then cut a 45-degree incision in the upper part of the pumpkin seedlings about 1 centimeter from the cotyledon, and the mouth depth is about two-thirds of the stem diameter, and then use the blade. Cut the upper part of the cucumber about 1.5 centimeters from the cotyledon up 45 degrees incision, the depth is about two-thirds of the stem, after the two melon seedlings are cut, then the cucumber seedlings are aligned to the cut surface of the pumpkin seedlings Plug in well, leave no gaps in the incision, and then use the graft clamp to get close to the side of the cucumber seedlings. When grafting, do the following: Accurate, fast, and clean. IV. Management after grafting. The well-matched seedlings should be quickly transplanted into the seedbed or nutrient bowl according to the east-west direction. The grafting clamps are unified toward the north. The buried parts are squash roots as the standard, and the grafted parts are kept clean. In order to ensure the appropriate temperature and humidity, it must be buckled in time. Small shed. It should be kept at 25-28 °C during the day and 18-22 °C at night, and the ground temperature should reach 23-28 °C. At the same time, the relative humidity of the air should be maintained at 85%-95%, which is conducive to healing and easing seedlings. Within 3 days after grafting, grass curtains should be shaded on the shed film, gradually opening the grass curtain after 3 to 5 days, lengthening the illumination time and proper ventilation, during the day, 22 to 24°C, 12 to 15°C at night, until the seedlings do not see light. Stop shading when wilting. 5, cut off the root: When the seedling grows to two leaves and one heart, that is, 10 to 13 days after the grafted seedling is transplanted, the stem of the cucumber seedling is cut off at the lower part of the joint by a blade and pulled out. When the grafted seedlings were sprayed with chlorothalonil 500 to 800 times for about 15 days, early control of downy mildew, and removal of grafting clips, in order to ensure uniform growth of seedlings, depending on the specific circumstances of the seedlings move. Sixth, colonization. Grafting seedlings grow to 4 to 5 true leaves to be planted. Prior to planting, apply organic manure and spread the mulch so that the soil depth cannot exceed the grafted joint.
Germany imported beads
Imported French lens
mould Die-casting Eight edge type Revolving arm
Optional emergency power supply≥3 hours
The main features:
1)Ideal cold light effects
Using the new LED cold light source, ensure energy saving and environmental protection and long service life up to 80,000hours and more.
The temperature increase of surgeon`s head below 1℃. LED do not engender infrared ray and ultraviolet radiation, without the temperature
rise and tissue damage caused by halogen shadowless light, also it can accelerate the wound healing after surgery, and without Radiation pollution.
With color temperature constant and soft, LED is very close to the sunshine.
1) Excellent shadowless effect
Lamp with the most scientific radian and Multi point light source design, ensure better uniform illuminance. When the lamps are partially occluded,
also can achieve perfect shadowless effect.Lamp panel radius of gyration ≥182cm, the lamp can be pulled to vertical floor, convenient to any angle illumination.
2) Excellent deep lighting
It is based on modularize method by Computer Aided Design, focused to irradiating with more beams of LED. It produces the deep lighting which beams
more than 1200cm,the illumination of center up to 180,000Lux or more, and offer the color temperature that can be adjusted from 3700K to 5000K which
is close to sunshine. Absolutely, it really reflects the color of human tissue and satisfied by all kinds of operating light needs.
3) Advanced control system
The use of liquid crystal display button control, to meet the needs of the medical staff of different patients with the brightness of the operation.
It offers illuminance memory function.
It does not effect using when a single circuit or one bulb is broken.
4) Universal suspension system
Rotating arm, a new type of alloy material is made of eight edge type.
Balanced system using imported arm module, more than 5 group universal joints, every cantilever must has more than 3 joints which can be rotated in 360°,
The structure is light, easy to manipulate, accurate positioning, can provide the maximum range of regulation.The equipped with fatigue correcting unit and
fix position hand handle device, easy to fix position after long time use.
5) Modern laminar lamp
The thickest part of lamp-chimney is not more than 10cm.
The lamp-chimney is made of ABS, The handle on the central of lamp can be detachable, can take high temperature (≤ 134°C) sterilization treatment,
easily adjust, flexible fixed.
Mobile Type Operating Light,LED Examination Light,Mobile Operation LED Light,Mobile Stand Operating Light Shandong Kang'erjian Medical Technology Ltd. , https://www.operatingtable.nl
