Posted on

The standard for oil added by oil tractors is to make the surface of oil in the oil pan of the engine lie between the upper and lower scales of the oil scale, and it is better to add high quality lubricants. Tractors to add lubricants should pay attention to the following three bogeys.

First, avoid adding too much engine oil sump oil, over the oil scale on the scale line, the oil is easy to break into the combustion chamber, so that the exhaust pipe spray oil, take the blue smoke. This will not only increase the consumption of oil, but also incomplete combustion of the engine oil will produce a lot of coke on the top of the piston and valve seat, aggravate the wear of mechanical parts, and even cause the piston to die or damage.

Second, bogey is not added in time before the operation is not timely to add oil, make the oil pan oil surface is too low, resulting in high oil temperature, poor lubrication. What's more serious is that because the oil level in the oil pan is lower than the lower scale of the oil scale, the tractor may cause the oil filter to be exposed on the oil surface when the tractor is braking on the downhill, over ridge, or sudden braking, so that the oil pump cannot suck in air to supply oil. , causing serious accidents such as burning tiles.

Third, avoid new, old engine oil mixed with the old engine oil contains high oxidation properties of the material, new and old engine oil mixed, can reduce the use of new motor oil. If you add a new engine oil at a time, you can use more than 50O hours. If half of the new engine oil is blended with half of the old engine oil, the use time is only 200 hours. Because of poor lubrication of old oil, it is easy to cause serious wear and black smoke.

Wooden Cup

Wooden Cup,Wooden Material Cup,Wooden Cup For Reusable,Natural Wooden Cup

Yangzhou Tongfun Red International Trading Co,Ltd. , https://www.i-ecbio.com