Usually, many vegetable growers use the method of flood irrigation because it saves things. However, flood irrigation has many shortcomings. Too high humidity is not good for vegetable growth, and it is very wasteful of water. Considering water conservation, vegetable growing areas in many places advocate drip irrigation, and a part of drip irrigation equipment is distributed free of charge. It is a pity that it is not used, but many vegetable farmers have used it after it has been used. Drip irrigation is easy to collapse the tube, usually It is the pouring of the land or the collapse of the main pipe, or the branch pipe collapses, making the shed full of water. How to do when using drip irrigation? Let's talk about the use of drip irrigation in vegetable cultivation. The problem with fistula during drip irrigation is that we ignore a small thing in the entire drip irrigation device. It is a pressure gauge, or some places to save a little bit of cost, no pressure gauge installed. Pressure gauges are simply too important for drip irrigation. Drip irrigation supplies water slowly to the soil at low pressure. It is not a spray but a slow drop of water. How do you know if drip irrigation works at low pressure? Just look at the pressure gauge. If the pressure is too high, adjust the valve to make it smaller. The pressure gauge is generally connected between the valve and the fertiliser. After the fertiliser is connected to the filter, there is a small trick to tell you, that is to say, during the drip irrigation process, if the pressure is found to be large, but the drip irrigation does not drip, then the maximum The reason is that the filter is blocked. The filter is used to filter sand and impurities in the water. In some places, there is more irrigation water and sand. The filter will be filled with a lot of sand, so the water in the pipeline cannot pass normally. filter. I remember once, when the shed was pouring water, the working grandfather came to me and said that the drip irrigation valve was opened. The branch pipe was not dripping. They checked for a long time and didn’t know what happened. I looked at it and thought it was There was too much sand in the filter, and after it was cleaned, it was poured. Therefore, for drip irrigation, it can work normally. The pressure gauge is very important. We are a greenhouse for planting an acre of land. The person who installed drip irrigation said that as long as it does not exceed 0.2mpa, it will be fine, so when we pour the land, we only need to pay attention to the shed. The pressure gauge on the head does not have to worry about the collapse of the tube. So sometimes it's not something bad, but we won't use it. This can't blame our vegetable farmers. Whatever is a learning process, if you use this drip, ask how much pressure should be controlled by drip irrigation. So, so many problems that make us headache, a small pressure gauge will be solved. Wiggle wire lock is designed to be used with poly lock base cap- sold separately. Greenhouse wiggle wire and base care are an effective method of attaching your poly film roof and or shade cloth. The greenhouse wiggle wire lock will hold form 4 mil to 20 mil thickness of material. Use one wire to hold the roof in place and then add a second wire to hold your shade cloth. When it is time to remove the shade cloth, you will not disturb the roof plastic. Greenhouse Wiggle Wire,Greenhouse Steel Wire,Greenhouse Spring Wire JIANGSU SKYPLAN GREENHOUSE TECHNOLOGY CO.,LTD , https://www.engreenhouse.com
Universal Base (WIG2000)- used on the curved surface, i.e. the arch for attaching the end wall covering.
Standard Base (WIG1000) - used along the straight lengths of your greenhouse.