Vacuum drying tank working principle The so-called vacuum drying is to dry the material under vacuum and heat it. If the vacuum pump is used for pumping and dehumidifying, the drying speed is increased. Note: If using a condenser. The solvent in the material can be recovered by a condenser. If the solvent is water, the condenser can be used, saving energy investment. Performance characteristics ◎The boiling point of the material solution under vacuum is reduced. Increase the heat transfer driving force of the evaporator. Therefore, the heat transfer area of ​​the evaporator can be saved for a certain amount of heat transfer. ◎ The heat source for the evaporation operation may use low pressure steam or waste heat steam. ◎The evaporator has less heat loss. ◎ It can be disinfected before drying. The supplier of vacuum vacuum drying tanks does not have any impurities in the drying process, which meets GMP requirements. ◎ is a static vacuum dryer. Therefore, the shape of the dried material will not be damaged. Adaptable materials: fruits, fruit slices, fish fillets, sea cucumbers, herbs, etc. It is suitable for low temperature drying of heat sensitive materials which are easy to decompose, polymerize and deteriorate at high temperature; it is widely used in pharmaceutical, chemical, food, electronics and other industries. Anesthesia Medical Co., Ltd. , https://www.jssinoanesthesia.com