Trolley Ultrasound Scanner,Color Doppler Ultrasound,Doppler Ultrasound Diagnostic Instrument,Trolley Full Digital Ultrasound Scanner Mianyang United Ultrasound Electronics Co., Ltd , https://www.uniultrasonic.com
The ultrasonic cleaning of the vertical ultrasonic bottle washer is to use the ultrasonic vibration to make the liquid "cavitation", and the powerful mechanical force is generated by the cavitation, and the various pollutions and dirt adhering to the object are peeled off to achieve the cleaning purpose. Ultrasonic non-porous, especially for geometrically complex objects and various micropores, blind holes, narrow slits, etc. can not be solved by conventional cleaning methods, it is easy to solve with ultrasonic cleaning. Therefore, ultrasonic is widely used in pharmaceutical, mechanical, electronic, textile, chemical, optical, surface treatment and other industries. The vertical ultrasonic bottle washer can not only achieve the purpose of cleaning, but also ultrasonically pulverize various microorganisms, Escherichia coli and similar viruses attached to the inside and outside of the bottle to lose the biological activity, thereby achieving disinfection and sterilization.
1. ready
(1) Check the equipment electrical switch, the instrument indicates, the equipment transmission is normal.
(2) Check if the dial bottle clutch is in the normal position, if it is in the neutral position, please adjust it.
(3) Close the machine power switch, turn on the speed switch, the inverter operation panel fluorescent screen displays the setting frequency. At this time, press the RUN key, the inverter works, and the motor speed gradually reaches the set value. Stop pressing the STOP button.
(4) Run the machine for 2 minutes to check whether the equipment and mechanical transmission structure are normal, whether the operation sound is normal, and the production can be performed normally.
2. Driving
First open the vertical ultrasonic bottle washer inlet valve, fill the reservoir with water, open the salt-free valve, open the injection water valve, spray the normal, open the water pump switch, so that the ultrasonic cleaning tank is filled with water, adjust into Water, keep a certain water level in the tank (do not open the ultrasonic wave below the water level), open the air valve. When the water level in the tank reaches the specified water level, the ultrasonic switch is turned on and the ultrasonic cleaner enters the working state.
(1) The operator puts the vial into the bottle tray and turns on the speed switch to make the speed 10 - 26Hz (100 - 400 / 7ML), press RUN to start production.
(2) When there is a bottle condition, first press the STOP button to stop, check the bottle bottle part, clean the broken bottle in time, adjust the bottle wheel, and then drive production.
(3) When the bottle is turned into the bottle wheel and the track in the bottle turntable, it is strictly forbidden to pour the bottle.
3. note
(1) Never open the ultrasonic wave below the water level.
(2) After the end of production, the ultrasonic wave must be turned off first, then the water should be discharged.
(3) If the ultrasonic wave does not work, please consult the professional maintenance personnel.
(4) To adjust the production amount, set the required operating frequency according to the inverter manual.
(5) It is strictly forbidden to pour the bottle into the track.