Clear Aligner Use Addition Vinyl Polysiloxane Impression Material

Popular Clip on Veneer Use silicone impression putty (HR-GY03):

1...Production Description:

Putty Impression Material provides all the benefits of a true putty, including higher consistency and insertion force than heavy body materials. Plus, it is designed exclusively for use with Mixing Unit-enabling reliable and reproducible dosage.
 
All impression materials get warmer-and therefore set faster - when placed in the mouth. Putty material exits the 2 unit at approximately 97ºF, because Putty is already warm when it is seated in the mouth, it helps warm up the wash material, actually accelerating setting time without reducing the intra oral working time.
 
Putty offers high detail reproduction and the same consistency and insertion force as conventional hand-mix putties. Without the potential for negative interaction between putty and glove.


 
2...Composition: 

vinyl polysiloxane, silica, food class fillings, Pt catalyst.
The product has supreme restoration property, thixotropic property, shape stability, and hydrophilicity, with no offensive smell.

The silicone of addition type has two kinds-putty and wash which are both used clinically with one-step and two-step method impression process.



3...Technical data:

4...How to use ?

We recommend that you have to hand a timer so you can time the stages which will be explained later. A mirror so you can see you have placed the impression tray as per the instructions. Please remove any dentures, plates or retainers before you start the impression process.

ESSENTIAL REQUIREMENTS:
Stopwatch  to time the stages it is essential to follow the times in all steps.
Mirror - to help take a good impression
Please read all the steps before you start.
Please remove any dentures before impression taking.



Step 1: Prepare For Impressions
 
Before you begin to make impressions, start by brushing and flossing thoroughly. Clean teeth are important for the perfect impression.

Step 2: Mix Catalyst & Base Paste
 
Remove 1 set of catalyst (white) and base (blue) paste from their container and begin mixing them until they become a solid blue. Mix the two pastes for exactly 45 seconds.
Do not mix and prepare both trays at once (repeat steps 2 through 4 for the upper and lower teeth).

Mixing the catalyst and base paste triggers a hardening process that occurs within roughly a total of 4 minutes. In the event you make an error on one of your impressions, 
the teeth whitening tray creation kit comes with 3 sets of material).
 
Step 3: Place Mixed Putty In Tray
 
Set putty in the tray. Make an effort to spread it evenly within 30 seconds.
Once set, let it sit for 1 minute before progressing to step 4. The red arch shown on the image represents the best position for 
your teeth when taking the impression in step 4.
 
Step 4: Make Impressions
 
Position your teeth in center of the impression material to avoid the teeth from coming in contact with the walls of the impression tray. 
Using your hands you will press the material into your teeth. 
The impression material should cover your gum lines.

Do not remove until 1:30 minutes has passed. Do not wiggle when removing the semi-hardened impressions from your mouth. Once removed from your mouth, let the impressions sit for 30 minutes.

GOOD IMPRESSION
You can see all of your teeth clearly in the impression tray.
You can see a deep outline of your gum above your teeth.
 
BAD IMPRESSION
Teeth look stretched or distorted.
Bite is shallow.
No gumline is visible.

PLEASE NOTE:
During hot summer months please store your impression putty in the refrigerator before use.
The impression putty should be allowed to warm up to room temperature before use.
The impression putty is a commonly used high grade dental impression material. Material safety data information available on request.




5...Payment & Shipping:

Delivery time: Within 3-5 working days after receipt of the payment;
Shipping way: DHL, EMS, UPS etc express door to door or air cargo;
Certificate: CE approved;
Payment: T/T, Western union, Paypal.

6...Company Information:

Zhengzhou Huaer Electro-Optics Technology Co., Ltd. has been established in 2006 and we has become one of the leading manufacturers for portable dental units, dental hand-pieces, teeth whitening lamps, teeth whitening kits, dental impression putty, etc. Our products are CE and SFDA certified. Over 10 years of successful overseas business is a result of our global standard of superior quality, competitive price, safe packaging, and meeting delivery schedules. OEM and customized orders are both available.

Our principle lies in "fidelity management and technology innovation." We are committed to supply the best quality dental equipments and to bring satisfaction to our customers. Our doors are open at all times for new partners around the world.



Contact Information:

Popular Clip on Veneer Use silicone impression putty (HR-GY03):

1...Production Description:

Putty Impression Material provides all the benefits of a true putty, including higher consistency and insertion force than heavy body materials. Plus, it is designed exclusively for use with Mixing Unit-enabling reliable and reproducible dosage.
 
All impression materials get warmer-and therefore set faster - when placed in the mouth. Putty material exits the 2 unit at approximately 97ºF, because Putty is already warm when it is seated in the mouth, it helps warm up the wash material, actually accelerating setting time without reducing the intra oral working time.
 
Putty offers high detail reproduction and the same consistency and insertion force as conventional hand-mix putties. Without the potential for negative interaction between putty and glove.


 
2...Composition: 

vinyl polysiloxane, silica, food class fillings, Pt catalyst.
The product has supreme restoration property, thixotropic property, shape stability, and hydrophilicity, with no offensive smell.

The silicone of addition type has two kinds-putty and wash which are both used clinically with one-step and two-step method impression process.



3...Technical data:

4...How to use ?

We recommend that you have to hand a timer so you can time the stages which will be explained later. A mirror so you can see you have placed the impression tray as per the instructions. Please remove any dentures, plates or retainers before you start the impression process.

ESSENTIAL REQUIREMENTS:
Stopwatch  to time the stages it is essential to follow the times in all steps.
Mirror - to help take a good impression
Please read all the steps before you start.
Please remove any dentures before impression taking.



Step 1: Prepare For Impressions
 
Before you begin to make impressions, start by brushing and flossing thoroughly. Clean teeth are important for the perfect impression.

Step 2: Mix Catalyst & Base Paste
 
Remove 1 set of catalyst (white) and base (blue) paste from their container and begin mixing them until they become a solid blue. Mix the two pastes for exactly 45 seconds.
Do not mix and prepare both trays at once (repeat steps 2 through 4 for the upper and lower teeth).

Mixing the catalyst and base paste triggers a hardening process that occurs within roughly a total of 4 minutes. In the event you make an error on one of your impressions, 
the teeth whitening tray creation kit comes with 3 sets of material).
 
Step 3: Place Mixed Putty In Tray
 
Set putty in the tray. Make an effort to spread it evenly within 30 seconds.
Once set, let it sit for 1 minute before progressing to step 4. The red arch shown on the image represents the best position for 
your teeth when taking the impression in step 4.
 
Step 4: Make Impressions
 
Position your teeth in center of the impression material to avoid the teeth from coming in contact with the walls of the impression tray. 
Using your hands you will press the material into your teeth. 
The impression material should cover your gum lines.

Do not remove until 1:30 minutes has passed. Do not wiggle when removing the semi-hardened impressions from your mouth. Once removed from your mouth, let the impressions sit for 30 minutes.

GOOD IMPRESSION
You can see all of your teeth clearly in the impression tray.
You can see a deep outline of your gum above your teeth.
 
BAD IMPRESSION
Teeth look stretched or distorted.
Bite is shallow.
No gumline is visible.

PLEASE NOTE:
During hot summer months please store your impression putty in the refrigerator before use.
The impression putty should be allowed to warm up to room temperature before use.
The impression putty is a commonly used high grade dental impression material. Material safety data information available on request.




5...Payment & Shipping:

Delivery time: Within 3-5 working days after receipt of the payment;
Shipping way: DHL, EMS, UPS etc express door to door or air cargo;
Certificate: CE approved;
Payment: T/T, Western union, Paypal.

6...Company Information:

Zhengzhou Huaer Electro-Optics Technology Co., Ltd. has been established in 2006 and we has become one of the leading manufacturers for portable dental units, dental hand-pieces, teeth whitening lamps, teeth whitening kits, dental impression putty, etc. Our products are CE and SFDA certified. Over 10 years of successful overseas business is a result of our global standard of superior quality, competitive price, safe packaging, and meeting delivery schedules. OEM and customized orders are both available.

Our principle lies in "fidelity management and technology innovation." We are committed to supply the best quality dental equipments and to bring satisfaction to our customers. Our doors are open at all times for new partners around the world.



Contact Information:

Water Proof Eyebrow Pen

Permanent Eyebrow Pen,Water Proof Eyebrow Pen,Eyebrow Tattoo Pen

Goochie Beauty Equipment Co., Ltd. , http://www.gztattoos.com