Net chain conveyor drive sprocket features

The chain conveyor sprocket is divided into a driving sprocket and a driven sprocket. The driving sprocket is mounted on the conveyor shaft by a spline; the driven sprocket is mounted on the conveyor drive shaft, and the power is transmitted through the chain. For the drive wheel, the general drive sprocket is smaller than the driven sprocket, which can reduce the speed and increase the twist.

Performance characteristics of the drive sprocket:

1. Selection of materials: Large sprocket and small sprocket are all formed by high-quality carbon structural steel.

2, processing and processing technology: the use of advanced milling processing technology to make the tooth shape more accurate. The sprocket has been tempered and heat treated as a whole, which greatly improves its comprehensive mechanical properties. The tooth shape hardness is above 68-72HRA, which makes the wear resistance of the sprocket significantly improved. The surface was sprayed and plated.

3, product series: economical and practical ordinary sprocket and superior performance sprocket.

Sprocket points: single row, double row, three rows, four rows, etc., the number of teeth from 6 teeth to 202 teeth.

Detailed classification:

1. Short pitch fine roller chain sprocket (08A--72A and 08B--72B);

2. Double pitch fine roller chain sprocket, (C208A--C224A and C208AL--C224AL);

3. Double speed chain sprockets (BS25-C210A, BS25-C212A, BS30-C210A, BS30-C212A);

4. Large pitch conveyor chain sprocket (pitch P <= 630, roller outer diameter <= 150). Common pitches are P=75, 80, 100, 110, 120, 125, 160, 200, 250, 300, 315, 500.