Recently, there were users who called the company's technical staff and said that the fermentation bed had not been produced successfully, the litter had no temperature, the excrement did not decompose, the litter was still wet, and it was suspected whether the company's products had problems. After many years of practice, if the company strictly follows the company's operating instructions for the production of the Jinbao dry-type fermentation bed, there will be no user reaction, the successful production of the fermentation bed can barely see the feces, the surface temperature can be maintained at around 20 °C for many years The temperature of the core fermentation layer can reach 35-45°C, and a well-maintained DNA fermentation bed can be operated stably for many years. The user's response to the above problem, through the company's technical personnel understand that the user's production of fermented bed duck padding thickness is only 20 cm, when the technician began to ask some of the fermentation bed, he did not tell the thickness of the bedding Only 20 cm, but after asking the local distribution agent to know the real situation. The bed thickness of the fermentation bed is very particular. If it is not properly controlled, it will directly affect the operation of the fermentation bed. The bed material of the fermentation bed is too thin. Although it is effective in the early stage of fermentation, it will not be long before it is used. Not only Can not accumulate heat, can not form a good gradient of the absorption of moisture, suction absorption, overload carrying the pig's excreta, in the case of over-saturated spoilage microorganisms work, the temperature decline corruption stinky, can not achieve the decomposition of feces, Completely loses the fermentation function of the fermentation bed. After the technical personnel of the company informed the user of the above reasons, the user was allowed to add dry sawdust to the wet litter, and the mixed litter was brought together into large piles. After three days of fermentation, the user told the company's technical staff two days after the fermentation. The litter still had no temperature. The technicians waited for another two days to see it. Two days later the user called again. He said with pleasure: "Yes, there is temperature in the litter, the feces is decomposed, and there is no odor." Jinbao Fermenting Bed Technicians allowed users to roll out large piles. Padding thickness was 40 cm thick. Users used the technician's request to make a fermentation bed. A total of 800 square meters was made. After the bed was laid, the ducks were driven in. Later, the technicians called again to understand the condition of the fermentation bed. The user said, "Yes, the fermentation bed is running very well, there is also temperature, there is no odor, the duck is very healthy, and the feed is less than before. It can be known from the above user's example that if the fermentation bed is running well, it must be strictly followed in accordance with the instructions for use and operation. The thickness of the bedding of the duck in the fermentation bed can not be less than 40cm, and the thickness of the bedding in the fermentation bed can not be lower than 50 cm. Therefore, when the user uses the Tycoon Fermentation Bed, if there is an abnormal situation, he or she should consult the company's technical staff in time to avoid unnecessary losses. For details, please contact: Beijing Huaxia Kangyuan Technology Co., Ltd. Telephone Toll Free Factory Taobao Shop Buy Fermented Bed Duck Fungus Please click: http://item.taobao.com/item.htm?spm=a1z10.1.w4004-4533113354.30 .04jeTu&id=13380668832 Recommended reading 1, Jinpo fermentation bed to remind users: Look for the brand to guard against counterfeiting 2. Why is the temperature of the winter fermentation bed not rising?
With long range distance sensor with digital output, you can measure and monitor distances intergrated to your arduino, raspberry pi etc. The Laser Distance Sensor low cost is a competitive measure sensor, can measure from 3cm to 40m, 100m, max to 150m with +-1mm~+-3mm accuracy. Also, other requirements can be customized, like distance sensor analog output,long range ir sensor. We will give you full technical support when you testing our long distance sensor.
Long Range Distance Sensors,Long Range Sensor,Long Range Laser Sensor,Laser Ranging Sensor Chengdu JRT Meter Technology Co., Ltd , https://www.infrareddistancesensor.com